High performance EVERSEAL™ WARM EDGE IG for commercial glazing is only available to order from Float Glass Industries Ltd, Manchester, England.

Specification : Sizes

• Maximum unit size: 5000mm x 2700mm
• Minimum unit size: 190mmx 350mm
• Thickness capability: 12mm to 60mm
• Thickness of Glass capability up to 16.8mm
• Max toughened size: 4200mm x 2400mm in house
• Available spacer widths: 6mm up to 20mm
• Max laminated size: 5000x2700mm

Specification : Glazing

• On-line scanning technology for quality control
• Triple glazed unit capability
• On-line 3 stepped unit capability
• Off-line four edge step capability
• Secondary seals availability: Kommerling ref GD116 Polysulphide as standard. Kommerling ref GD920 Silicone for structural glazing
• On-line gas filling
• In house Spandrel Panels available upon request
• In house Heat Soak Testing available upon request

Specification : Testing

• BS EN ISO 9001:2000
• All products fully guaranteed
• Tested to the performance requirements of EN1279 parts 2,3 & 6

Glass Types

As one the leading glass distributors in the UK, Float Glass Industries are able to offer Everseal™ Insulated Glass units in a wide range of product combinations utilising glasses available from all the major global float glass manufacturers

Product Supply / Contact Details

High performance EVERSEAL™ WARM EDGE IG for commercial glazing is only available to order from Float Glass Industries Ltd, Manchester, England.

Phone: 44 (0)161 946 8000
Email: everseal@floatglass.co.uk
Fax: 44 (0)161 946 8074

Contact: Paul Newcombe / Paul Naylor

Order lead times

Lead times are dependent upon product specification required. Standard lead time approx 2 weeks subject to confirmation at the time of order.

Glass Products Available

An extensive range of products are available from the global glass producers subject to availability at time of order

Terms and Conditions

All orders placed are subject to FGI’s standard Terms and Conditions of Sale and Terms and Conditions of Tender which are available for inspection upon request.

All FGI products are to be used ONLY with approved glazing sealants. Please refer to our technical department for advice prior to glazing. FGI cannot accept responsibility for the use of non-compatible products.